* Ideal for improving inserting works.
* Strikes strongly with a slow rhythm.
* Produces limited noise, and does not cause mis-strikes.
- Ideal for inserting pins, bushes, collar
caps, oil seals, etc.
- It is especially useful when assembling
engines.
|
RH20 |
 |
RH80 |
RH100Z |
|
Standard rivet snap |
- Single blow type: Strikes once each time
the lever is pressed.
Main unit: RH20, RH80, RH90, RH100Z and RH200
- Continuous blow type: Strikes
successively when the lever is pressed.
Main unit: RH60 ( continuous blow version of RH20)
To carry out a single blow operation, release the lever for
each strike.
*The striking power is reduced slightly from the second
strike.
- It is also possible to perform marking,
riveting, chipping and drilling jobs by speparetelly
ordering a rivet snap.
|
| Model
No. |
Overall
length
(mm) |
Weight
(g) |
Grip
size
(Diameter=mm) |
Air
consumption
(cm3/stroke) |
Air
pressure
(Mpa) |
Blowing
power
(kgf/m) |
Stroke
(mm) |
| RH20 |
213 |
900 |
37 |
220 |
0.5-0.7 |
0.23 |
12 |
| RH60 |
294 |
1400 |
45 |
180 |
0.5-0.7 |
0.23 |
12 |
| RH80 |
254 |
1300 |
45 |
650 |
0.5-0.7 |
0.32 |
12 |
| RH90 |
328 |
1600 |
43 |
1200 |
0.5-0.7 |
0.60 |
18 |
|
RH100Z |
330 |
2100 |
43 |
1500 |
0.5-0.7 |
0.90 |
18 |
| RH200 |
341 |
2100 |
51 |
2500 |
0.5-0.7 |
1.30 |
18 |
|