| |
The air puller easily pulls out nails,
staples, etc., used on various materials. It can also perform
stretch insertion of cushioning rubbers. |
WP38-15-EP10H(Blades provided) |
 |
Usage
Removal of nails, staples, etc.
Removal of blades, metal rules etc., of Thomson wooden molds.
Removal of metal fittings from seats, etc., used on trains, etc.
Stretch insertion of rubber and other soft materials.
|
| Model
No. |
Overall length
(mm) |
Weight
(g) |
Grip
size
(Diameter=mm) |
Air
pressure
(MPa) |
Stroke
(mm) |
Blades
No. |
|
WP38-15-EP10H |
225 |
650 |
44 |
0.5乣0.6 |
15 |
EP10H |
|
WP38-35-EP10H |
285 |
800 |
44 |
0.5乣0.6 |
35 |
EP10H |
|
WP50-25-EP20H |
345 |
2250 |
75 |
0.5乣0.6 |
25 |
EP20H |
| Example of nail, staple,
etc., removal |
|
Example of stretch
insertion of rubber vibration insulator |
- Put the bladed section firmly onto the
metal fitting (figure 1).
- Press the lever.
- The blade closes and grabs the metal
fitting and then it removes the metal fitting (figure 2).
|
- Place the blade on the tip of the rubber
(figure 1).
- Press the lever.
- Insertion is completed (figure 2).
|
 |
 |
|