MR50A(Blades sold separately) |
 |
| Effective when a great deal of
strength is required. |
|
| MP55A is
the boosted-up version of MR50A. |
|
|
MP55A(Blades sold separately) |
Use these cutters to cut through thick iron and lead
wires, or to perform a tight caulk. They are the most powerful power
cutters, and they have the thickest cylinder amongst all power cutters.
| Model
No. |
Overall length
(mm) |
Weight
(g) |
Diameter
(mm) |
Air
pressure
(N) |
| MR50A |
239 |
1290 |
75 |
4704 |
| MP55A |
372 |
2000 |
75 |
7742 |
| *Refer to the page on
"Standard Blades" for the shapes of standard
blades. |
| *The same standard blades can be used for
both MR50A and MP55A. |
| Model
No. |
Blade
No. |
Material |
Cutting capacity
(Diameter=mm) |
|
MR50A |
S120 |
Copper |
5.5 |
| S120S |
Copper |
5.5 |
| P120 |
Steel |
4.5 |
| CR120 |
Steel |
4.5 |
| EP120 |
Steel |
4.5 |
| Z120 |
Piano wire |
1.6 |
|
MP55A |
F120 |
Plastics |
11.0 |
| P120 |
Steel |
5.0 |
| CR120 |
Steel |
5.0 |
| EP120 |
Steel |
5.0 |
| Z120 |
Piano wire |
2.0 |
| Model
No. |
Blade
No. |
Crimping capacity |
|
MR50A |
A120-5.5 |
Solderiess terminal non
insulated 5.5sq |
|
AR120-5.5 |
Connector 5.5sq |
|
MP55A |
A120-8.0 |
Solderiess terminal non
insulated 8.0sq |
|
A120-14.0 |
Solderiess terminal non
insulated 14.0sq |
|
AR120-8.0 |
Connector 8.0sq |
|